Fixed cylindrical boiling pans with large capacity - 500 liters, suitable for placement in transit areas with small dimensions, where appliances with sharp edges can cause ergonomic problems and make movement difficult, allowing it to be used comfortably from different angles.
Direct and direct pressurized (autoclav) gas versions, indirect and indirect pressurized (autoclav) gas and electric versions.
- Well with bottom in AISI-316 stainless steel and thickness between 20/10 and 40/10, suitable for products that are particularly acidic.
- Walls in AISI-304 stainless steel with thickness between 20/10 and 40/10.
- Double wall in models with indirect heating - bain marie.
- Lid in AISI-304 stainless steel with a thickness of 15/10, with balanced springs and anathermal handle / non-heating.
- Supporting structure in AISI-304 stainless steel.
- Satin AISI-304 exterior finish.
- Adjustable stainless steel feet.
- Thermal insulation guaranteed by high density ceramic plates.
- Tank drain with removable filter.
- Front drain tap with insulating (athermal) handle.
- Pressure gauge to control the pressure inside the double wall.
- Manual air release valve to reduce the pressure in the chamber during heating.
- Water is added to the tank through a tap with removable outlet.
HEATING
GAS MODELS: direct heating, steam pressure heating, indirect heating, indirect pressure heating
- Burners - high efficiency tubular stainless steel construction.
- Manual piezoelectric ignition and pilot flame.
- Smoke exhaust grille.
- Safety valve and thermocouple tap (direct heating version).
INDIRECT ELECTRIC MODELS:
- Heating is achieved by heating elements immersed in Incoloy alloy with adjustable power through an energy variator.
- Safety thermostat that ensures that the machine does not operate in case of overheating or insufficient water.
- Water level control in the double wall with tap and automatic water filling option.
- Standard operating voltage of 400V-3N50Hz
INDIRECT STEAM, PRESSURE HEATING:
- Heated with steam (via connection) and a valve that allows the gradual addition of steam to the vessel.
- Indirect heating equipment: pressure control in the double wall is carried out by a safety valve set at 0.5 bar, manual valve actuation and pressure gauge.
- Pressure or autoclave versions allow cooking cycles to accelerate during the day. They are equipped with a silicone rubber sealing compound, clamps for airtight closure and a safety valve set to 0.05 bar.
Heating |
Model |
Code |
Power kw |
Dimensions mm |
Gas direct heating |
MCG-500 |
19001445 |
55,00 |
1390x1479x1020 |
Gas direct - autoclav |
MCG-500 A |
19001446 |
55,00 |
1390x1479x1020 |
Gas indirect heating |
MCIG-500 |
19003079 |
55,00 |
1390x1479x1020 |
Gas indirect autoclav |
MCIG-500 A |
19001450 |
55,00 |
1390x1479x1020 |
El indirect | MCIE-500 | 19003077 | 48,00 | 1360x1300x1000 |
El indirect autoclav | MCIE-500 A | 19001444 | 48,00 | 1360x1300x1000 |