Flatwork ironer (Ø1000) PHOENIX - SPE1000-2600-3300 E/G/S

PHOENIX calenders are the only compact machines that can take up, dry, iron, fold (crosswise and lengthwise) and sort the laundry in one operation. This is a real revolution in these laundry facilities that do not have much space, but have to process large quantities of bed linen. These machines need no more than 27 square meters to be able to work at full capacity. An additional automatic laundry feeding device is available for these machines, which allows the machine to be operated by a single operator. The linen is folded and collected in the built-in side stacker - 2 models (standard and compact - to be ordered separately, not included in the price).

• Roll dimensions: working width 2m 60cm. and 3m 30cm, diameter 1000 mm.
• Suitable working height - 1050 mm.
• 1 or 2 working belts: one belt for sheets and two belts for tablecloths and small sizes of laundry.
• Lengthwise folding (1 or 2 times) and cross folding (up to 3 times).
• Folding by photocell and compressed air
• Two types of stacker, with the possibility of programming the number of folded laundry. The stacker can be located on both sides of the machine.
• Frequency inverter.
• NOMEX feeding and ironing belts.
• Painted steel panels.
• Polished steel shaft with finger guard.
• Touch screen control: programs can be created with controlled speed (between 3 and 18 m/min) and temperature.
• Large output capacity: depending on the residual moisture of the laundry - up to 290 kg/h. for washing directly from a high-speed washing machine.
• Electric, gas or steam heating.
• Gas models:

- gas with radiant burners, 25% gas savings and 25% greater performance compared to models with atmospheric burner.

• Powerful exhaust system.
• Compressed air connection required: pressure 6.5 bar.

OPTIONS

• Automatic 1-lane feed with vacuum feed belts - allows for one operator
• Vacuum table to assist in placing linen
• Rear outlet with bypass
• Rear collector for small laundry sizes with 2 or 4 lanes + bypass.
• Partial bypass, through which different programs can be used in each of the two working lanes.
• Double air pressure in the longitudinal folding for thicker linen.
• System for dumping linen into the stacker.
• Compact stacker (Roll-off): can stack up to 5 tablecloths, 10 sheets (19041214 Compact stacker with dimensions: 685x 2.385x660 and power 0.36kW)
• Standard stacker: can stack up to 10 - 15 tablecloths, 10 sheets (19041216 Stacker dimensions: 1.365x2.476x1.200, power 0.36kW)
• Special voltage
• Remote service
• Ironing machine maintenance kit

IMPORTANT NOTE
- These ironing machines are configured to be connected to a linen stacker.
- The stacker must be ordered separately with its corresponding code.
- The price of the IRONING MACHINE DOES NOT INCLUDE the price of the stacker.
- The price of the ironing machine DOES NOT INCLUDE the necessary costs for INSTALLATION AND SETUP.

(*) : Estimated productions for 140 g/m2 cotton textiles with amoisture level of 45 % humidity and 100% use of roll surface. (**) Length of the machine without the stacker.