Electric indirect heating boiling pan (80L) - M-E710 BM

Electric heating boiling pan with indirect heating, capacity 80 L and tank dimensions: Ø420x605 mm. SERIES 700

General characteristics

• Tops made of AISI-304 stainless steel with a thickness of 1.5 mm.
• Laser-cut joints, automatic welding and polishing of the bent elements. Hidden screws.
• Lid with front handle designed to protect against burns. Diagonal opening at 70°.
• Drain hole to redirect any liquid spills.
• 80-liter tank, integrated into the top surface by machine welding, whose base is made of AISI 316L stainless steel with a thickness of 2 mm.
• The kettle tank is filled with cold or hot water through a solenoid (electromagnetic) valve, which is activated by a switch located on the front panel.
• The boiler is drained safely and effortlessly, through a G1-1/2” UNI ISO 228 safety valve with athermal (the material does not heat up) handle.
• The boiler drain filter is made of AISI-304 stainless steel, strong, reliable and easy to remove and clean.
• The controllers are positioned on a protective support base and have a system to prevent water infiltration.
• A light indicator shows when the machine is connected and when it is heating.
• IPX5 water protection level.

DIRECT HEATING/DIRECT FLAME MODELS - GAS MODELS only

• Heating is carried out by a high-efficiency stainless steel tubular burner, which is controlled by an energy regulator, which optimizes combustion and allows slow and even cooking.
• Heating regulation through different burner power levels - lower energy and water consumption.
• The burner is ignited by spark ignition.

MODELS WITH INDIRECT HEATING - WATER BATH/bain-marie - GAS AND ELECTRIC

• Bain-marie chamber around the tank, with automatic filling system.
• Automatic chamber level control with three-way protection system by means of a pressure switch: 1) chamber pressure control; 2) limiting thermostat to prevent overheating and 3) overpressure safety valve.
• Automatic chamber cleaning.
• The heating at the base of the vessel/tank acts on the water in the chamber that surrounds it, thus the steam produced at a temperature of 107 ºC heats the base and sides of the vessel evenly.

ELECTRIC MODELS

• Heating is carried out by heating elements located at the bottom of the bain-marie chamber and is controlled by an energy regulator and a pressure switch.
• Voltage: 400 V 3+N. Other voltages are possible - optional!

POSSIBLE OPTIONS:

- 230 1N- Transformation A 230 V single-phase

- 230 III - A 230 V three-phase transformation without neutral

- Marine transformation for boats