Tilting bratt pans (90L) - SB-910

Tilting bratt pans 90 liter capacity, 900 KORE series. Models can be electric cast iron/stainless steel, with manual or motorized turning, as well as gas, propane or natural gas at 50 or 60 Hz, cast iron/stainless steel, manual or motorized.

General characteristics

• Laser-cut joints, automatically welded and polished elements.
• Motorized or manually cranked lifting systems that raise the pan to a vertical position.
• Variants with cast iron and stainless steel pans.
• Design with rounded corners and no sharp edges and with a wide opening that allows all cooking and cleaning operations to be carried out more easily.
• Flange around the perimeter to stop condensed water from overflowing.
• The bottom of the pan is very thick (8 mm for iron pans and 10 mm for stainless steel pans), which guarantees even heat distribution.
• The pans are filled with water using an electric valve with a switch on the front of the machine. The filling pipe is located at the back of the machine.
• Double-walled lid with a drain at the back to redirect condensation back into the pan.
• Spring-loaded lid balancing system.
• Microswitch to stop heating when the pan is lifted.
• High-temperature enamelled cast iron flue protector.
• Access to components from the front.
• Machines with IPX5 water protection.
• Handle on the front lid for access.
• Electric heating models use shielded stainless steel heating elements located under the bottom of the pan.
• Gas heating models use six-branch steel burners (eight branches for one and a half module pans) controlled by a thermocouple safety valve.
• The temperature at the bottom of the pan is controlled by a thermostat, between 50 and 310 °C.
• Heating with branched gas burners or electric heating elements located at the base of the pan itself, together with the great thickness of the bottom of the pan, ensure maximum uniformity in temperature distribution, guaranteeing even cooking.

VOLTAGE FOR ELECTRIC MODELS:
- 400 V 3+N - Standard

POSSIBLE OPTIONS:

- 230 1N- Transformation A 230 V single-phase

- 230 III - A 230 V three-phase transformation without neutral

- Marine transformation for boats

POSSIBLE ACCESSORIES: - 900 SERIES STANDS - REFRIGERATION STANDS - KORE ACCESSORIES - KORE WHEELS - HIGH CHIMNEY