Hood-type dishwasher, CONCEPT+ series, for 500x500 mm baskets, using water pressure from the water supply network for rinsing (without rinse pump), with built-in water softener. The machines can be connected to 50 or 60Hz voltage.
VERSIONS ACCORDING TO ADDITIONAL EQUIPMENT: Drain pump (B)/ Drain pump + Peristaltic dispenser (B D)/ Recuperator + drain pump (RC B)/ Recuperator + Drain pump + Dispenser (RC B D)
| Water softener (S) / WHP-502 S - Built-in softener that provides continuous water softening. This allows the detergent and rinse aid to work at their full effect and significantly reduces limescale deposits in the machine. The user can easily refill the tank, and a sensor warns when the tank needs to be refilled. Intelligent regeneration that guarantees continuous washing. Regeneration is carried out fully automatically and imperceptibly for the customer. The water quality is always constant. | |
| WHP-502 S B | Built-in softener (S) Drain pump (B) |
| WHP-502 S B D | Softener +Drain pump + Peristaltic dispenser (B D) |
| WHP-502 S RC B | Softener + Recuperator + Drain pump (RC B) |
| WHP-502 S RC B D | Softener + Recovery system + Drain pump + Peristaltic detergent dispenser (RC B D) |
DISPENSERS
- STANDARDLY INSTALLED RINSE DOSER - Hydraulic rinse aid dispenser (for models with water supply pressure).
- OPTION - WASH DOSER (D) - Peristaltic wash dispenser, installed as a model version.
DRAIN PUMP (B)
- A drain pump/drain pump (B) is included, thanks to which the so-called. volumetric rinsing: the dirty wash water is partially drained before rinsing, which makes it possible to: 1/Avoid useless waste of detergent by slower water contamination and 2/Reduce energy costs during the wash water heating phase by continuously regenerating the wash water with warmer rinse water.
ENERGY RECOVERY SYSTEM (RC)
- Minimizes the steam released to create a more comfortable working environment by using the heat from the device to additionally heat the incoming water and reduces energy costs.
- The process is carried out at the end of the cycle for 40 seconds (configurable), increasing the incoming water temperature from 10ºC to 25ºC, which means that a connection to cold water (15-25ºC) is recommended.
INTERFACE
- 2.8" TFT color display with backlight.
- Illuminated buttons and multi-colored START button that changes color depending on the machine's status.
- Color-coded status indicators.
- Display of operating parameters, such as tank and boiler temperature, or cycle time.
- Tank and boiler heater operation indicators.
- Self-diagnosis and error signaling.
- Timer function that allows the machine to turn on or off at a specified time.
- Energy saving mode (standby): Reduces energy consumption when the machine is not in use.
- User-selectable programs according to equipment use (glass, plates and bar), as well as machine-specific programs.
- Technical menu (access via password):
- View of all electronics inputs and action on outputs to facilitate rapid problem detection.
- Change of operating parameters, such as heating temperatures, wash and rinse times and etc.
PROGRAMS:
Dishwasher programs - standard:
- Light: 60 sec. ((2.3 l/cycle, Washing temperature: 60ºC, Rinsing temperature: 85ºC)
- Standard: 90 sec. (2.6 l/cycle, Washing temperature: 60ºC, Rinsing temperature: 85ºC)
- Intensive: 180 sec. (3 l/cycle, Washing temperature: 60ºC, Rinsing temperature: 85ºC)
- Extended: 480 sec. (3 l/cycle, Washing temperature: 60ºC, Rinsing temperature: 85ºC) ·
- Cutlery: 300 sec. (3 l/cycle, Washing temperature: 65ºC, Rinsing temperature: 85ºC)
Additional programs:
- Glass programs;
- Bar programs
(3) In models with energy recovery (RC) system, the cycle time is extended by approximately 30 seconds.
(4) The second rinse is performed with cold water by switching off the boiler heating element.
CONSTRUCTION DETAILS
- Single-layer hood that slides smoothly on metal sliders, reducing lifting effort and noise level. Body with single insulation.
- Fully stamped tank without welds or sharp edges. The washing chamber is free of internal pipes, edges and openings where dirt can accumulate.
- Easy cleaning of the internal parts without having to remove the basket support. The support can be tilted by 90°.
- The machine and its tables can be installed in a straight line or in a corner. It is also possible to change the working direction left-right or right-left.
- Upper and lower washing and rinsing arms.
- Maximum visibility thanks to the upper position of the control panel.
- Lid opening system with microswitch.
- Cycle start activated by removing the lid or manually (deactivated).
- Easy handling thanks to the handle surrounding the lid.
Two-stage filtration
- Surface filter of the tank made of composite material. Optional stainless steel filter (SF).
- Suction filter of the pump made of polypropylene.
Soft start: The cycle starts slowly and gradually increases to maximum speed to prevent light objects such as glassware and plates from falling.
Wash/rinse arms. Duo-KLIP:
- Combined wash and rinse arm on the same level, made of composite material, preventing the two arms from intertwining.
- Low-friction and very light arm, allowing all the power supplied by the pump to be used for washing the dishes and not for rotating the arm.
- Wash and rinse openings designed with a specific geometry to reach the most inaccessible places. They spray water precisely, achieving 10% less water consumption, reducing electricity and chemical consumption and thus helping to minimize operating costs.
- The click-together mechanism makes it easy to assemble and disassemble the cleaning arm.
RINSE WITHOUT RINSE PUMP
- Rinse with water pressure.
- Standard hydraulic dosing of rinse aid.
MODELS WITH DRAIN PUMP (without drain pupm --> Gravity drainage)
- Performs the so-called volumetric rinse: the dirty wash water is partially drained before rinsing, which makes it possible to: 1/Avoid useless waste of detergent by polluting the water more slowly and 2/Reduce energy costs during the wash water heating phase by continuously regenerating the wash water with warmer rinse water.
- Performs the machine cleaning cycles.
SPECIFICATION
|
Макс. теоретична производителност/ Max. theoretical productivity |
Кошници/ч. Baskets/h |
60 (*при водоподаване с температура 15ºC) |
|
Размери/ Dimensions |
mm | 630x750x1480 |
| Размери с дръжката/ With handle | mm | 715x935 (*Регулируема височина (-25/+50 мм) |
| Височина с отворен капак/ Height with open hood | mm | 1960 |
|
Височина с рекуперация на енергия/ Height with energy recovery (RC) |
mm | 1975 |
| Нетно тегло/ Net weight | kg | 97 |
|
Нетно тегло с рекуперация на енергия/ Net weight with energy recovery (RC) |
kg | 113 |
| Вместимост на резервоара/ Tank capacity | L | 33 |
| Вместимост на бойлера/ Boiler capacity | L | 9 |
| Ниво на водна защита/ Protection against water | IPX | 4 |
MULTIPOWER
- Allows the machine to be connected to a network with single-phase or three-phase voltage (230 1N~/230 3~/400V 3N~).
- The powers of the individual elements of the machine, as well as the total power, depend on the electrical connection of the machine (multivoltage) and are given in the "Multipower" table.
SUPPLIED ACCESSORIES:
- 19000484 Cup basket, 500x500x110 mm. 1 pc.
- 19000487 Basket for 16-18 plates, 500x500x110 mm. 1 pc.
- 19000792 Cutlery basket, for 15 pieces of cutlery, 105x105x130 mm. 1 pc.
OPTIONS:
- 60Hz
- Stainless steel washing and rinsing arms (X)
- Stainless steel surface filter (SF)
- Double insulation (P)
- Glass mesh basket with 5 dividers (19107616) - the option excludes the standard accessories (R).
- Connectivity K - (Wi-Fi and Ethernet). Allows downloading of HACCP information.
- Sensoring options (Z) include: Chemical dosing control (DA); Low chemical level control via probes (L), available as an accessory, with warning on the control panel. Standard on models with water softener (S) or models with energy recovery system (RC).
