Flight type dishwasher FCO-W4-RD

Възползвайте се от удобството да закупите уреди на изплащане или да финансирате на вноски цялостното оборудване на вашата професионална кухня или перално стопанство. С нашите партньори ще Ви предложим най-добрите условия за изпълнението на вашия проект, без да е необходимо да плащате цялата сума предварително. tbitbi Запитване за лизинг

Electric dishwasher with left or right entry - Flight type. Flight type dishwashers have a conveyor belt that moves the baskets through a steel tunnel for thorough cleaning. The path is usually a straight line, which means that modular units require a lot of space. The dishwasher has a loading area, different modules according to function and an unloading area.

DESCRIPTION:

  • The washing modules are without internal pipes.
  • Double-layer construction.
  • Double-walled doors with heat and sound insulation.
  • The doors are counterbalanced with safety stops that stop the process, allowing full and unrestricted access to all zones (pre-wash, wash, pre-rinse, rinse).
  • Modular construction allowing the machine to be divided into modules.
  • Entrance tunnel 630 x 440 mm.
  • Loading section with a length of 1.2 m and unloading section with a length of 2.2 m., at a height of 900 mm.
  • Splash guard (AS) in the loading area -150 mm with double curtain.
  • Automatic activation of the washing process by a photocell detecting the presence of dishes.
  • The speed of the conveyor belt is controlled by a frequency converter and a microswitch. This allows the machine to stop in the event of a blockage without damaging it. An unblocking function reverses the belt to remove the blockage.
  • Auto-timer: after a period of inactivity, the traction motor is deactivated, reducing energy consumption.
  • Energy-saving mode (stand by): Reduces electricity consumption and limescale deposits on the heated elements by reducing the temperature of the boiler and the water tank when the machine is not running.
  • Automatic preheating system. Activates the washing pumps and the drying module before reaching the set temperature to warm up the environment, thus achieving a quick start of the machine.
  • Washing tanks: 100-liter tank.
  • The washing system consists of 6 upper and 5 lower arms with high-performance rinsing nozzles, made of stainless steel in the pre-wash and wash zones, which are removable and easy to clean.
  • Three-stage filtration in the washing and re-washing modules.
  • The bottom of the tank is perforated to ensure complete drainage and facilitate cleaning.
  • Thermally insulated boilers.
  • Adjustable steam suction system that prevents steam evaporation.
  • Integrated energy recovery system located in the upper part of the machine. Allows a reduction of the installed power by 9kW.
  • Dryer (D) placed in the unloading zone and the possibility of adding up to 2 additional dryers.
  • Curtains resistant to high temperatures and detergents installed between the modules to prevent water splashes and contamination. Double curtains at the machine inlet and outlet.
  • Conveyor belt end detection sensor with stop and automatic start.
  • Electronic water temperature control for all processes.
  • Safety thermostat.
  • 3 production programs. Complies with the DIN 10534 hygiene standard.
  • Water protection IPX5 category.

SPECIFIC FEATURES:

  • Electromechanical switch that allows you to choose between 3 programs and two digital displays for control and visualization of the washing and rinsing temperature.
  • Intensive program (DIN-10534): 1575 dishes/h. - 190l/h. - washing 65 (ºC) - rinsing 85 (ºC)
  • Medium program: 2325 dishes/h. - 210l/h. - washing 65 (ºC) - rinsing 85 (ºC)
  • High capacity program: 3100 dishes/h. - 230l./h - wash 65 (ºC) - rinse 85 (ºC)

MODULE COMPOSITION

  • (AS) Splash protection module at the inlet.
  • (W) Main wash module at 65ºC.
  • Pre-rinse module with pump - 4 gradual rinses.
  • Pre-rinse: consists of 2 upper and 1 lower pre-rinse arms. Triple effect system.
  • Rinse: with one rinse pump. Device type in accordance with EN 1717 and WRAS regulations. Consists of 1 upper and 1 lower rinse arm. Uses a frequency converter for the pump, which allows automatic adaptation of the amount of rinse water to the selected conveyor speed.
  • (R) Module with energy recovery system as standard.
  • (D) Powerful dryer for optimal drying of ceramic dishes. Possibility to add two additional dryers for drying plastic or stainless steel.
  • MAX. PRODUCTION (PLATES/HOUR): 3100

ACCESSORIES SUPPLIED:

  • 19000484 Standard basket 2pcs.
  • 19000488 Baskets for 16 glasses with a diameter of 110 mm and a height of 105 mm 2pcs.
  • 19036306 Standard basket with a solid base 1pcs.

NOTE:

Water connection: It is advisable to introduce sanitary water in the dishwashers, with a temperature of 15 - 25 ºC.

Water pressure: Minimum: 2 bar = 2 kg/cm2 Maximum: 4 bar = 4 kg/cm2 Water softener:

All glass / dishwashers should be connected to a treated water supply when the local supply is over 10 HF / 6 HD.

Capacity of boiler:
  • 20л
Capacity of tank:
  • 100л
Double isolated door:
  • Да
Draining pump:
  • Да
Productivity:
  • 3100кг/ч
Rinsing pump:
  • Да
Suitable for GN1/1:
  • Да
Water consumption:
  • 190-230л/цикъл
Power:
53.8kW

Right (FCO-W4-RD_R_19073687.pdf, 782 Kb) [Download]

Left (5_EN_FCO-W4-RD_L_19075203.pdf, 781 Kb) [Download]