Front-loading dishwasher, CONCEPT+ series, for 500x500 mm baskets, using water pressure from the water supply network for rinsing.
Model WUP-502 is available in 3 main variants, each of which in 4 versions, depending on the specific equipment, and can be at 50 or 60Hz:
Variants according to features:
- Water pressure / WUP-502 - all WUP-502 CONCEPT+ models use the network water pressure for rinsing (they do not have an additional rinse pump). Model without additional features.
- Cold rinse (C) / WUP-502 C - In machines with the cold rinse option, the second rinse is performed with cold water, while without this option the rinse is performed with cold water by turning off the heating element of the boiler.
- Water Softener (S) / WUP-502 S - Built-in softener that provides continuous water softening. This allows the detergent and rinse aid to work at their full effect and significantly reduces limescale deposits in the machine. The user can easily refill the tank, and a sensor warns when the tank needs to be refilled. Intelligent regeneration that guarantees continuous washing. Regeneration is carried out completely automatically and imperceptibly for the customer. The water quality is always constant.
Versions of each variant, according to additional equipment:
- Basic model: WUP-502, WUP-502 С, WUP-502 S
- Model with drain pump (B): WUP-502 B, WUP-502 С B, WUP-502 S B (The dirty wash water is partially drained before rinsing, which allows: 1/Avoiding unnecessary waste of detergent by slower water contamination. 2/Reducing energy costs during the wash water heating phase by continuously regenerating the wash water.)
- Model with detergent dispenser (D): WUP-502 D, WUP-502 С D, WUP-502 S D
- Model with drain pump and dispenser (B D): WUP-502 B D, WUP-502 С B D, WUP-502 S B D
Dispensers
- RINSE - Hydraulic rinse aid dispenser (for models with mains pressure) or peristaltic (for models with rinse pump) - fitted as standard.
- WASH - Peristaltic rinse aid dispenser fitted as a model version. (optional)
Smart softener (S)
- Built-in softener that provides continuous water softening. This allows the detergent and rinse aid to work at their full effect and significantly reduces limescale deposits in the machine.
- The user can easily refill the tank, and a sensor warns when the tank needs to be refilled.
- Smart regeneration that guarantees continuous washing. Regeneration is carried out fully automatically and imperceptibly for the customer. The water quality is always constant.
INTERFACE
- 2.8" TFT color display with backlight.
- Illuminated buttons and multi-colored START button that changes color depending on the machine's status.
- Color-coded status indicators.
- Display of operating parameters, such as tank and boiler temperature, or cycle time.
- Tank and boiler heater operation indicators.
- Self-diagnosis and error signaling.
- Timer function that allows the machine to turn on or off at a specified time.
- Energy saving mode (standby): Reduces energy consumption when the machine is not in use.
- User-selectable programs according to equipment use (glass, plates and bar), as well as machine-specific programs.
Technical menu (access via password):
- View of all electronics inputs and action on outputs to facilitate rapid problem detection.
- Change of operating parameters, such as heating temperatures, wash and rinse times and etc.
Dish programs
- Quick/gentle: 90s (2.3 l/cycle, wash temperature: 60ºC, rinse temperature: 85ºC)
- Standard: 120 sec. (2.6 l/cycle, wash temperature: 60ºC, rinse temperature: 85ºC)
- Intensive: 180 sec. (3 l/cycle, wash temperature: 60ºC, rinse temperature: 85ºC)
- Cutlery: 300 sec. (3 l/cycle, wash temperature: 65ºC, rinse temperature: 85ºC)
Additional programs:
- Glass and glass programs
- Bar programs
(3) For models with mains pressure (WUP-502), consumption may vary depending on the water supply pressure. Water consumption per cycle (at 2 bar pressure): 2.2/ 2.4/ 2.7/ 2.7 l/cycle
(4) For machines with the cold rinse option (C), the second rinse is performed with cold water, while without this option, the rinse is performed with cold water by switching off the boiler heating element.
CONSTRUCTION DETAILS
- The sides of the washing chamber are partially double-lined.
- Stamped tank with slope for full drainage.
- Stamped basket guides.
- Upper and lower washing and rinsing arms.
- Insulated boiler.
Door:
- Soundproof and heat-resistant double-lined door.
- Magnetic microswitch to stop the cycle in case of accidental door opening.
Double-stage filtration system:
- Polypropylene pump suction filter that blocks even the lightest dirt, protecting the wash pump. There is a blue indicator on the overflow or filter, depending on the model, which shows that it is part of the "color identification" concept.
- The standard composite surface filters on the tank retain coarse dirt. The filter can be easily removed without disassembling the wash and rinse arms.
- Insulation in the boiler.
Dual-flow wash pumps:
- One inlet and two outlets, one for each arm, without the need for flow separation to avoid power loss and reduce noise.
Soft start:
- The cycle starts slowly and gradually increases to maximum speed to prevent light objects such as glassware and plates from falling.
Duo-KLIP (Wash/Rinse Arms):
- Combined wash and rinse arm on the same level, made of composite material (optionally available in stainless steel (X)), which prevents the two arms from interfering with each other.
- Low-friction arm and very low weight, allowing all the power supplied by the pump to be used for washing the dishes and not for rotating the arm.
- Arm wash and rinse openings designed with a specific geometry to reach the most inaccessible places. They spray water precisely, achieving 10% less water consumption, reducing electricity and chemical consumption and thus helping to minimize operating costs.
- Arm locking mechanism, facilitating assembly and disassembly for cleaning.
- Rinsing with mains pressure.
- Hydraulic rinse aid dosing as standard.
- Gravity drainage, as well as an optional versions with a drain pump.
Machine self-cleaning programs: for models with drain pump (B) and softener (S).
- Self-cleaning: Self-cleaning and automatic draining reduce operator work and ensure machine maintenance.
- Draining: Automatic draining.
- Automatic filling: Self-cleaning program with automatic draining and filling.
SPECIFICATION
- Max. theoretical capacity: 40 Baskets/h. (with hot water at 50ºC)
- Dimensions: 576x605x835 mm. (Adjustable height (+25/+0 mm))
- Net weight: 55 kg.
- Tank capacity: 20 l.
- Boiler capacity: 7 l.
- The powers of the individual elements of the machine, as well as the total power, depend on the electrical connection of the machine (multivoltage) and are given in the "Multipower" table.
- Rinse pump power: 0.13 kW
- Drain pump power: 0.04 kW
- Water supply pressure min. - max. in WUP-502 models: 2-4 bar
- Water supply pressure min. - max. in models WUP-502 S: 3-4 bar
- Water supply pressure min. - max. in models WUP-503: 1-4 bar
- Water supply temperature max.: 60 ºC
- Water protection level: IPX 4
MULTIPOWER
- Allows the machine to be connected to a single-phase or three-phase voltage network (230 1N~/230 3~/400V 3N~).
SUPPLIED ACCESSORIES:
- 19000484 Basket for glasses, 500x500x110 mm. 1 pc.
- 19000487 Basket for 16-18 plates, 500x500x110 mm. 1 pc.
- 19000792 Basket for cutlery, for 15 pieces of cutlery, 105x105x130 mm. 1 pc.
OPTIONS:
- 60Hz
- Stainless steel wash and rinse arms.
- Glass rod basket (19107616) - option excludes standard accessories.
- Connectivity K - (Wi-Fi and Ethernet). Allows downloading of HACCP information.
- Sensoring options (Z), including: Chemical dosing control (DA); Low chemical level control via probes (L), available as an accessory, with warning on the control panel. (Standard on models with water softener (S)).
