Dishwashers for 400x400 baskets using water pressure in the mains for rinsing. Model with LED displays (T)
4 versions of the model are available according to the equipment, each of which can also be ordered at 60Hz:
- Basic model: WGC-400 T
- Model with drain pump: WGC-400 T B (The dirty wash water is partially drained before rinsing, which allows: 1/Avoiding unnecessary waste of detergent by slower water contamination. 2/Reducing energy costs during the wash water heating phase by continuously regenerating the wash water.)
- Detergent dispenser: WGC-400 T D
- Model with drain pump and dispenser: WGC-400 T B D
INTERFACE
- Two-digit LED displays (T) for displaying the wash and rinse temperatures, as well as alphanumeric status and error codes.
- Also includes operating indicators for the tank and boiler heaters.
PROGRAMS:
- P1 (Standard): 120s (2 l/cycle at 2 bar, Wash temperature: 60ºC, Rinse temperature: 65ºC)
- P2 (Intensive): 180s (2 l/cycle at 2 bar, Wash temperature: 60ºC, Rinse temperature: 65ºC)
(3) Consumption at a water supply pressure of 2 bar. At higher pressures, consumption will increase.
CONSTRUCTION
- Washing chamber sides with partial double lining.
- Stamped tank with slope for complete draining.
- Stamped basket guides.
- Upper and lower washing and rinsing arms.
Door:
- Soundproof and heat-resistant double-layer door.
- Magnetic microswitch to stop the cycle in case of accidental door opening.
Double stage filtration system:
- Polypropylene pump suction filter that blocks even the lightest dirt, protecting the wash pump.
- Blue indicator on the overflow or filter depending on the model to show that it is part of the "color identification" concept.
- Composite surface filters on the tank as standard, retain coarse dirt.
- The filter can be easily removed without disassembling the wash and rinse arms.
Dual-flow wash pumps:
- One inlet and two outlets, one for each arm, without the need for flow separation to avoid power loss and reduce noise.
Soft start:
- The cycle starts slowly and gradually increases to maximum speed to prevent light objects such as glassware and dishes from falling.
Wash/rinse arms Duo-KLIP:
- Combined wash and rinse arm on the same level, made of composite material, preventing interference between the two arms.
- Extremely lightweight, low-friction arm, allowing all the power supplied by the pump to be used for washing dishes, not for rotating the arm.
- Wash and rinse openings designed with a specific geometry to reach the most inaccessible places. They spray water precisely, achieving 10% lower water consumption, reducing electricity and chemical consumption and thus helping to minimize operating costs.
- Snap-on arm mechanism, facilitating assembly and disassembly for cleaning.
Rinsing with water pressure
Standard hydraulic dosing of rinse aid
SPECIFICATION
- Max. theoretical capacity: 30 Baskets/h (at hot water temperature 50ºC)
- Dimensions: 466x535x725 (Adjustable height (+25/+0 mm))
- Net weight: 35 kg.
- Tank capacity: 9 l.
- Boiler capacity: 4 l.
- Tank heater power: 0.8 kW
- Boiler heater power: 2.4 kW
- Wash pump power: 0.29 kW (50Hz); 0.36 kW (60Hz)
- Rinse pump power: 0.13 kW
- Drain pump power: 0.04 kW
- Total power: 3.49 kW (50Hz), 3.56 kW (60Hz)
- Voltage: 220-240 1N~
- Water supply pressure min./max.: 2-4 bar
- Water supply temperature max.: 60 ºC
- Water protection level: IPX 3
ACCESSORIES SUPPLIED:
- 19082432 Cup basket, 400x400x110 mm. 2 pcs.
- 19084452 Insert/rack for 11 plates, 400x400x110 mm. 1 pc.
- 19102721 Cutlery basket, for 9 pieces of cutlery, diameter 96 mm. and height 104 mm. 1pc.
OPTIONS:
- Double-layer trim - Increases the width of the machine by 20 mm, 10 mm on each side.
- Round basket (+ support) 19110751 (+19110752) - This option excludes the glass baskets (19082432) and the plate insert (19084452) from the standard accessories.
- Cup basket with rods 19107614 - This option excludes the standard accessories.
